- GENERAL VENTILATION FILTERS
- HEPA&ULPA FILTERS
- HIGH TEMPERATURE FILTERS
- MOLECULAR FILTERS
- HOUSINGS&FRAMES,Kitchen Exhaust Filtration
- TURBOMACHINERY FILTERS
how to change the air filter on a dirt bike
The filter captures dirt and debris and prevents it from being sucked into the motor during operation.
There may be two reasons for this.
First, dust and debris can cause excessive wear and tear of moving parts inside the motor, such as pistons and rings.
Second, clogged filters can reduce the amount of air entering the motor, which will result in a decrease in performance.
This maintenance is simple.
With these instructions, this can be done even for beginners.
The whole process takes five to fifteen minutes.
Manual 10mm socket and ratchet or 10mm combo wrenchClean ragsilcone GreaseNew air filter oil for dirt bike owners (if needed)1)
First, find the black box on your dirty bike.
On most bicycles, the black box is located under the seat. 2)
Use the 10mm sleeve or combination wrench to loosen and remove the two bolts that hold the seat in place. 3)
Lift the seat off the bike. 1)
Remove the wing nut that holds the air filter in place. 2)
Remove the air filter. 3)
Separate the filter from the plastic support frame.
Note: Be careful not to damage the cage.
Doing so results in incorrect sealing and could cause damage to the engine. 1)
Clean the air box with a clean rag. 2)
Let the air box dry. 1)
Apply air filter oil on the new filter if necessary. Note: I use No-
Which one comes from the Toil air filter-oiled.
Not all air filters. oiled. 2)
Apply grease to the part where the filter touches the air box. 3)
Install the new filter on the plastic support frame.
Note: Be careful not to tear up the new air filter when installing it in a cage.
Doing so causes damage to the engine. 4)
Apply a thin layer of waterproof grease to the bottom of the filter. 4)
Insert the new air filter into the housing. 5)
Tighten the wing nut and fix the new air filter in place. 6)
Replace the seat.
If the old filter can still be used, you can clean it and reuse it.
When the filter gets dirty, it doesn\'t always need to be replaced. 1)
Apply the dish soap to the old filter. 2)Wet the filter. 3)
Knead the filter in your hand and make the foam. 4)
Rinse the filter. 5)
Let the filter dry. 6)
Apply air filter products oil on the cleaning filter.
You have successfully replaced the air filter on the dirt bike.
I suggest you clean the air filter when it is dirty, usually after riding.
Once your air filter is not available, it must be replaced.
The maintenance of air filters is critical to the performance of the engine.
By performing this task on a regular basis, you will get the benefits of better engine performance and less motor wear.
This simple task can save you a lot of money in future repairs.
Now that you have completed this task, pick up your helmet and go for a ride.
Shanghai Booguan Purification Equipment Co., Ltd. will continue to build a corporate culture that respects and values the unique strengths and cultural differences of our associates, customers and community.
Being a performance leader means Shanghai Booguan Purification Equipment Co., Ltd. will achieve operational excellence, industry-leading customer satisfaction and superior financial performance.
Shanghai Booguan Purification Equipment Co., Ltd. believes that the average profitability will be sufficient.
Millions of women across the world suffer from air cleaner filter. Are you also one of them who suffer from acne problem? now you will see some hope in Shanghai Booguan Purification Equipment Co., Ltd.'s offer of . Click Booguan Purification Equipment to know more.
Armed with professional team and advanced equipment, Shanghai Booguan Purification Equipment Co., Ltd. is specialized in offering high quality in various designs. Visit us at Booguan Purification Equipment to find your desired .